Support Center

A Different Perspective on Tool Presetting

Last Updated: Aug 29, 2011 07:04PM EDT
It is not reasonable to expect that the effective diameter of tool rotating at 1 RPM on a presetter in a climate controlled tool room will be the same as when it is in a 10,000 RPM spindle with rising bearing and ambient temperatures. Tool offsets should be measured on the machine with lasers or probes in order to compensate for environmental changes. However this does not mean that offline presetter are still not very valuable. Building or reloading a tool assembly to pre-determined and consistent dimensions ensures dynamic repeatability. Also, delivering an accurate "logistically preset" tool assembly to a probe-equipped machine will allow for a quicker approach to the probe and prevent crashes. 



Contact Us

  • Post a Question
  • Email Us
  • Live Chat!
  • Tooling Cloud™ Login

    Go to our Home Page
    Call Us Toll Free: 1-888-811-3260
    Fax: 1-800-807-3789

    121 East Beaver Avenue
    State College, Pennsylvania 16801

    Go to our Linkedin Page Follow us on Twitter Visit our YouTube Channel Visit our Facebook Page Read our Blog

    GPS Package Tracker
    Share Your Screen Live
    Record Your Screen
    Detailed Consulting Request
    Upload Harmonizer or TXF Files

    Learning Center